0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
Can you fit 18 alloys on a vauxhall corsa c?
Yes, aslong as theyre 18 7.5 or lower.... 7.5 being the thickness of them from front to back ;)
How do you replace the fuse for a cigerette lighter on a 1995 Vauxhall Corsa?
Fuse 18 and its a 30 amp fuse, i hope you have sorted this as you will have no reverse lights aswell
What size wiper blades are needed for a vauxhall corsa sxi?
20inch on driver, side 18 inch on passenger side, and 16 inch at the rear
How do you replace the thermostat located on a 2003 Pontiac Aztek?
Removal Procedure:Remove the air cleaner and duct assembly.Drain the coolant until the coolant level is below the thermostat.Remove the crossover exhaust pipe.Remove the radiator hose from the thermostat housing.Remove the thermostat housing bolts and clean any sealer from the bolt threads.Remove the thermostat housing and gasket.Remove the thermostat.Clean the mating surfaces.Installation Procedure: Install the ThermastatInstall the thermostat housing and gasket.Install the thermostat housing bolts. TightenTighten the bolts to 25 N·m (18 lb ft).Install the radiator hose to the thermostat housing.Install the crossover exhaust pipe.Install the air cleaner and duct assembly.Fill the cooling system.
How do you change thermostat on 2002 buick rendezvous?
Thermostat ReplacementRemoval Procedure1. Remove the air cleaner and duct assembly.2. Drain the coolant until the coolant level is below the thermostat.3. Remove the crossover exhaust pipe.4. Remove the radiator hose from the thermostat housing.5. Remove the thermostat housing bolts and clean any sealer from the bolt threads.6. Remove the thermostat housing and gasket.7. Remove the thermostat.8. Clean the mating surfaces.Installation Procedure1. Install the thermostat.2. Install the thermostat housing and gasket.Notice: Refer to Fastener Notice in Service Precautions.3. Install the thermostat housing bolts. Tighten the bolts to 25 Nm (18 ft. lbs.).4. Install the radiator hose to the thermostat housing.5. Install the crossover exhaust pipe.6. Install the air cleaner and duct assembly.7. Fill the cooling system.
How do you change the thermostat on 2002 buick rendezvous?
Thermostat ReplacementRemoval Procedure1. Remove the air cleaner and duct assembly.2. Drain the coolant until the coolant level is below the thermostat.3. Remove the crossover exhaust pipe.4. Remove the radiator hose from the thermostat housing.5. Remove the thermostat housing bolts and clean any sealer from the bolt threads.6. Remove the thermostat housing and gasket.7. Remove the thermostat.8. Clean the mating surfaces.Installation Procedure1. Install the thermostat.2. Install the thermostat housing and gasket.Notice: Refer to Fastener Notice in Service Precautions.3. Install the thermostat housing bolts. Tighten the bolts to 25 Nm (18 ft. lbs.).4. Install the radiator hose to the thermostat housing.5. Install the crossover exhaust pipe.6. Install the air cleaner and duct assembly.7. Fill the cooling system.
Who manufactures Montibello Electric Fireplace sold at Sofa Mart?
I would lean on saying it's a classicflame product. If it has Digital thermostat with numerical readout in the glass. This is there feature! Many of these furniture frames use interchangeable fire box by different companies (ie- 18" 23" ) Digital thermostat with numerical readout Digital thermostat with numerical readout
Where is the thermostat in a 2004 Pontiac grandprix?
2004 Pontiac thermostat Service and Repair 2004 Pontiac Thermostat Replacement 2004 Pontiac Removal Procedure : 1. If equipped with an automatic transmission, remove the exhaust manifold. 2. Drain the cooling system. 3. Remove the thermostat housing to water pump feed pipe bolts. 4. Remove the thermostat housing to water pump feed pipe. 5. Remove the thermostat. Installation Procedure 1. Install the thermostat. 2. Install the thermostat housing to water pump feed pipe. Notice: Refer to Fastener Notice in Service Precautions. 3. Install the thermostat housing to water pump feed pipe bolt. ^ Tighten the thermostat housing to water pump feed pipe bolt to 10 Nm (18 inch lbs.). 4. If equipped with an automatic transmission, install the exhaust manifold. 5. Fill the cooling system.
Where can you specifically locate the IAT sensor on a 98 Dodge Durango?
it's on top of the engine close to where the thermostat is.it does have two wires 18 or 20 ga.
Inside a GE CHT18-60 thermostat control box there is a toggle labeled longer with the numbers 1 through point 18 what does it do?
Is a slider for the "adjustable heat anticipator assembly"
How many amps is 18-2 copper wire safe for?
That wire is only good for low voltage wiring such as a doorbell or a thermostat any more would cause a fire.
Where is the thermostat and how to change it on a 1993 Subaru legacy?
thermostat is located behind the lower radiator hose (low). there is two or three bolts that hold the thermostat housing to the engine block. the thermostat is behind it. you can drain the radi. threw the drain or just remove hose clamp and pull off hose. lots of coolant, little messy but quick. after you remove the old thermostat remember how it came out. make sure the area the t-stat sits in is clean. replace with new t-stat and reassemble. carefully tightening bolts, 14-18 foot pounds. get bolts tight and give a good snug. would recommend replacing coolant lost with new coolant. if not sure what kind , just use universal coolant
