At the lower end of the top rad hose within the water outlet. Mark
At the lower end of the top rad hose within the water outlet. Mark
Where is the crank pulley located on a 1991 honda civic dx
On a 1991 Honda Civic, the thermostat bleeder valve is typically located on the thermostat housing. To find it, look for a small valve or screw near the top of the housing, which is where the upper radiator hose connects. This valve is used to release air from the cooling system during coolant refills. Always ensure the engine is cool before attempting to bleed the system to avoid burns.
Problem is most Likely the ground wire on the motor by the thermostat
The computer is located under the passanger floor mat.
inside the distributor
Would it be the same on a 2001 civic
The tension belt for a 1991 Honda Civic and located on the driver side of the engine. The pulley is right above the compressor.
best transmission fluid 1991 Honda civic lx
Follow the upper rad hose and at the engine there is a housing containing the thermostat. When replacing it make sure the spring goes toward the engine.
a 1991 Honda civic motor
The fuel pump is located inside the gas tank.