Want this question answered?
Trouble code P0013 means:"B" camshaft postion-actuator circuit (Bank 1)
Bank 1 is the passenger side of the engine Sensor 1 is in the exhaust pipe ( or end of exhaust manifold ) before the exhaust enters the catalytic converter ( upstream )
The HO2S Bank 1 Sensor 1 is located on the exhaust manifold nearest to the front of the car. The Bank 1 Sensor 2 is located on the exhaust pipe before the catalytic converter and after the pipe from the bank 1 and bank 2 exhaust manifolds meet.
1. Ignition position 12. Press and hold reset button. Trip Meter3. Ignition position 24. Meter flash and start car immediately.Cheers... Helped me twice. Volvo S80 owners for 12 years.Eddie P
Bank 1 Sensor 1- driver's side exhaust pipe Bank 1 Sensor 2-right before catalytic converter Bank 1 Sensor 3- right after catalytic converter Bank 1 Sensor 1- passenger side exhaust pipe Bank 1 Sensor 1- driver's side exhaust pipe Bank 1 Sensor 2-right before catalytic converter Bank 1 Sensor 3- right after catalytic converter Bank 2 Sensor 1- passenger side exhaust pipe
Bank # 1 is the passenger side of the engine Bank # 1 , SENSOR # 1 , is close to the engine in the exhaust Bank # 1 , SENSOR # 2 , is in the exhaust after the catalytic converter ( downstream )
bank 2 is the drivers side of the engine and sensor 1 is in the exhaust system ( either the exhaust manifold or the EXHAUST PIPE before the exhaust enters the catalytic converter )
On your V6 engine : Bank 1 is the passenger side of the engine Sensor 1 is in the exhaust pipe ( or exhaust manifold ) before the exhaust enters the catalytic converter ( upstream )
Bank 1: Backside of the engine, mounted in the exhaust manifold, above the exhaust pipe flange Bank 2: Backside of the engine, mounted in the exhaust pipe (below bank 1 sensor) Bank 3: Frontside of the engine, mounted in the exhaust manifold
On a Ford Explorer bank 1 is the passenger side of the engine and sensor 1 is in the exhaust ( either the exhaust manifold or the exhaust pipe ) before the catalytic converter ( upstream )
Bank 1 is the bank of cylinders that has contains the number one cylinder which in your case would be the drivers side bank of cylinders. The O2 sensor for bank 1 sensor 1 is located in the exhaust pipe directly after the drivers side exhaust manifold.
Bank 1 sensor 1 is screwed into the exhaust manifold on the back of the engine. Bank 1 sensor 2 is screwed into the catalytic converter.Bank 1 sensor 1 is screwed into the exhaust manifold on the back of the engine. Bank 1 sensor 2 is screwed into the catalytic converter.