The blower motor resistor on a Mercedes 300e is located beneath the blower motor on the Mercedes 300e, if ever it needs replacing.
The blower motor on a Mercedes Benz 300e is changed by disconnecting the wiring harness and unbolting the blower from its housing. The motor is then lifted away and a new blower motor connected.
need to locate the blower motor on Mercedes 300E 3.0 motor
Open the bonnet, remove the scuttle cover, wiper motor, and finally blower motor.
To replace the blower motor on a C230 compressor of a Mercedes Benz, remove the bolts holding the motor in place. It is next to the blower, under the passenger side of the dashboard. Replace with new and reinstall the bolts.
Hummm!! it Seems it is a known problem with Mercedes from 94 to 98. Is two problemsThe blower motor resistor can be defective andthe blower motor itself.
the blower motor is accessible thru firewall engine compartment.below center wiper mech.inside a plastic housing.
you access the fan blower by removing the windshield wiper motor from the outside of the car.
your resistor is under the glove compartment next to the blower motor
Passenger side under hood on firewall. Remove screws and lift cover over A/C filter-remove filter and there is the blower motor.
under the pasenger side dash
remove right side under dash panel remove blower cover unplug motor remove motor and blower regulator swap regulator on to new motor note all u need is a philpps head and a 15 and 25 torques