0
Under the dash, alongside the steering column, on a bracket so that the operating rod is depressed by the brake pedal lever.
It is removed by twisting 30 degrees anti-clockwise and pulling towards oneself. To remove from wiring harness, prize out the wiring plug with a flat bladed screwdriver.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
Where is the stoplight switch on a 2002 Chrysler Sebring sedan?
The stop lamp switch is on a bracket above the brake pedal.The stop lamp switch is on a bracket above the brake pedal.
What is wrong with your 1986 buick regal if the rear signal lights blink but the brake lights doesnt come on?
Probably either a bad brake lamp switch, improper adjustment of the brake lamp switch or a bad turn signal switch.The brake lamp switch also contains the cruise disconnect switch, but often only the brake lamp portion will fail due to the higher current involved in running the brighter lamps. The switch develops resistance caused by carbon tracking on the contacts from the spark that's created whenever the switch changes states.Also, the brake lamp circuit runs through the turn signal switch. If the brake lamp contact in the switch goes bad, you can have a situation where the brake lamps won't light but the turn signals function properly.
How do you fix the brake lights on a 1992 Honda Accord LX already changed fuses that didn't wotk?
if it isn't a fuse or lamp problem, check the brake lamp switch on the brake pedal, if you unplug the switch, and jumper the connection, and you have brake lamps, replace the switch...
What is the bulb number for brake light on 2004 jeep liberty?
See sources and related links below for the 2004 Jeep Liberty Brake Light Lamp Numbers.
Why is my Esp light on in 2005 Hyundai Tucson?
brake lamp switch failure
What make the brake lights stop working when the ignition is turned on?
Bulbs blown/Brake lamp switch inoperative
Could a broken wire by the brake pedal be the reason the brake lights stopped working?
Yes if the wire is part of the brake lamp switch
Why do brake lights and stop lamp light remain on on a Mercedes?
Switch loose or faulty? Check if the switch is fitted to the brake pedal. Perhaps the bracket has worked loose.
Where is the stop lamp switch located on 2011 KIA Sportage?
If you mean the switch that turns on the brake lights when you put the brakes on , it is above the brake arm of the foot pedal.
Where is the clutch safety switch on a 2002 Hyundai Santa Fe?
on the clutch pedal, just like a brake lamp switch
What is the Cadillac abs code c1295 fix?
C1295 means (Brake lamp switch circuit open). Most likely a bad brake switch on the brake peddle, or a bad capacitor between the 2 switches. .
Why is after changing lamp out brake light still not working?
Fuse, switch, wiring, ground circuit.
