0
it should be around the intake manifold area, depends what yr your car is and what size of motor u have.
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
1999 cavalier change egr valve?
where do I find the egr valve on a 1999 Chevy Cavalier?
Where is EGR valve located on 89 Chevy Cavalier?
The EGR valve is directly under the hood on the 89 Cavalier.
Where is the EGR valve on a 2000 cavalier 2.2L?
Where_is_the_EGR_valve_on_a_98_Cavalier
How do you fix a EGR valve on a 1999 Chevy Cavalier 4-cylinder automatic?
If it's a 2.4 L DOHC motor, there is no EGR valve.
Where is the egr valve location on a 2002 cavalier 2.2 DOHC?
426 hemi's ass
What is the location of the EGR valve on a 1998 Chevy Cavalier Z24?
Next to the power steering pump
Where is the starter for a 1996 Chevy Cavalier z24?
Right below the EGR valve bolted to the transmission.
How do you remove the EGR valve from a 2000 Chevy cavalier?
WOW what is this site good for if u can't answer the questions being asked!!!
Where is the egr valve located on an h22a4?
The EGR valve is located at the front of the h22a4 engine. The EGR valve is right beside of the front of the EGR valve.
Check engine light is on egr is ok. 97 cavalier?
If the check engine light is on in a 1997 Cavalier, there can be many different things wrong besides the EGR Valve. There could be bad oxygen sensors, low oil pressure, or even low spark.
Why might a 1991 Chevy Cavalier 4 cylinder idle too high?
Check for vacuum leak or faulty EGR valve.
How do you change the EGR valve on a 1997 Chevy Cavalier 2.2 L engine and is it something a reasonable person can do?
Well I have a '96 Cavalier with a 2.2 and I was actually looking at my EGR Valve today. Its actually very simple! I dont know if you know much about cars but if your looking at the motor from the front of the car, on the right hand side is the thermostat; right behind the thermostat is the EGR Valve. On the EGR valve is a plug. All you have to do is take that plug off of the top. Then on the EGR valve at the bottom is 2 bolts. Remove those bolts and pull off the existing EGR valve. If your new one didn't come with a gasket make sure not to ruin the old one. Now all you have to do is replace it the exact opposite way as taking it off. Its actually very simple. If you can remove two bolts then you can do it.
