There is no drain on the engine you have to drain the oil tank and then remove a hose turn the bike over to get the oil out of the crank case (dont let it run too long). Change the oil filter and then seal it up and fill with 20/50 . Check the tank again after running it a few minutes. Enjoy your ride.
oil tank
.038" to .043"
Drain the system from the lower hose on the rad.
at the bottom of the radiator on the driver side
The oil drain plug is located on the underside of the engine directly below the filler hole. The head of the bolt will need a 17mm socket to remove.
There is no drain on the block, just the drain on the radiator (bottom of rad drivers side, facing the transmission).ANS 2 The above is perfectly correct, but if you still wish to drain coolant fluid from that block, the easiest way is removing the lower rad hose from engine side.
there is no need for an engine oil drain plug, because when the oil filter is removed and the oil is drained from the oil tank (by way of the oil tank drain hose located by/under the battery box) there is no oil that remains in the engine.
If you are asking about the oil drain plug, Then slide up under the engine and look at the bottom of the engine and that will be the oil oil pan and you will see a drain plug in the back bottom side of the oil pan. Take it out.
San Dieguito Heritage Museum was created in 1988.
Saginaw Heritage High School was created in 1988.
Timbuktu was inscribed as a World Heritage site in 1988.
The University of Salamanca declared a UNESCO World Heritage site in 2010.