check your owner's manual.
Pull out on the headlight switch.
To install fog lamps on a 1968 Mustang you will need the following items: 1968 Fog Lamp Wiring Kit C8ZZ-15223-FUD FOG LAMP BAR BRACKETS C8ZZ-15266/7-A FOG LAMP BULB FDU-15220-A FOG LAMP HOUSING ASSEMBLY C8ZZ-15200-AC FOG LAMP SWITCH C8ZZ-15A214-A source: AAPD.net
The fog lamps are activated on a 2000 Grand Cherokee via the headlight switch. Pull the END of the lever OUT.
In the Citroën C1, the fog lamp switch is typically located on the control stalk attached to the steering column or on the dashboard, depending on the model year. Look for a symbol resembling a fog light, which usually appears as a lamp with a wavy line projecting from it. To activate the fog lights, you generally need to turn the switch or pull the stalk towards you. Always refer to the vehicle's manual for specific details related to your model.
> Resetting service reminder: 1. Press and hold rear fog lamp switch 2. Turn ignition on, do not start engine 3. Release rear fog lamp switch 4. Press and hold trip button (end of left side stalk) 5. Press and hold rear fog lamp switch 6. See "Resetting Service Light" message in message center
To switch on the fog lights in a Peugeot 206, first ensure that your vehicle is in the "on" position. Then, locate the fog light switch, which is usually found on the right stalk of the steering wheel or on the dashboard. Turn the switch to the appropriate position, typically indicated by a symbol of a lamp with horizontal lines. Remember that the fog lights can only be used in specific conditions, such as fog or heavy rain.
My Jeep liberty fog lamp switch will not pull out unless the control for the headlights is turned on first. Could this be the reason?
I believe the fog lamp push button is in the center stack of your dash , below your radio
To turn on the fog lights in a Corsa C, first ensure the vehicle is in the "On" position. Then, locate the fog light switch, which is typically found on the headlight control stalk or a separate switch on the dashboard. Turn the switch to the fog light icon (usually resembling a lamp with a curved line) to activate the fog lights. Make sure your headlights are on, as most fog lights require them to be activated.
you pull the headlight switch towards you to turn on the foglamps - the indicator light will come on
go to your head light switch and turn it past auto and all the way to on and the pull out, once for your front fog lamps and twvce for your rear fog lamp
A fog lamp relay serves as an electrical switch that controls the power supply to fog lamps in a vehicle. It allows the fog lamps to operate without drawing excessive current through the vehicle's main wiring, thus protecting the electrical system. By using a relay, the fog lamps can be activated with a lower-current switch, improving safety and reliability. Additionally, it helps ensure that the fog lamps only operate when needed, enhancing visibility in adverse weather conditions.