The 1948 F150 was the last year with a carberator. The mechanical fuel pump was on the side of the motor. Some carberated models may have had a single electric pump with a six port selector valve. 1985 and newer had fuel injection with electric fuel pumps mounted in the tanks. Some early fuel injected may have had low pressure lift pumps in the tanks and a single high pressure pump after the tank selector valve. It also had another mecanism called a "Dual Function Reservoir" that returned the unused fuel to the correct tank.
According to the drawing in the 1997 Ford Expedition Owner Guide : The fuel pump inertia switch ( shut off switch ) is located in the front passenger footwell , behind the kick panel ( that's the interior trim panel , just in front of the front door , at the persons feet )
According to the 2003 Ford F-250 Owner Guide : The fuel pump shut off switch ( inertia switch ) is located in the front passenger footwell by the kick panel ( but the drawing indicates it is behind the panel ) * the kick panel is the interior trim panel , in front of the front door , beside the passengers right foot
On all Harleys with disc brakes the front brake switch is located inside the right handlebar switchbox.
The fuel reset switch is located behind the panel by the foot of the front seat passenger. The fuel reset switch is located behind the panel by the foot of the front seat passenger.
I have a 96 Honda Civic and the fan switch is located on the thermostat housing, which is connected to the back left part of the engine (if you are looking from the front of the car). To help you find it, there will be a hose connected to the therm housing that leads to the bottom of the radiator. The fan switch is gold colored and will have a wire connected to it. Disconnect the wire by pressing in the tab on the connector. To change the fan switch, I would recommend you use a deep socket (22mm, i think). hope that helps RZ
There is orthogonal drawing with your front, side/s and back view of your object. Isometric and oblique for your overall view of the object. And explode to see how you project are connected together or assembled.
It is located on the front of the engine, above the oil filter.It is located on the front of the engine, above the oil filter.
Behind the front bumper.
the reverse light switch.. aka backup light switch is located on the front of the transmission along the side screws into the transmission if standing in front of the car looking down at the transmission you can see it
The port is located may be located on the back or front of your computer. For instance a USB port is usually on the front. A port is then connected to a certain device. For instance your keyboad is connected to a keyboard port so that your computer keyboard can work. All ports are connected to the motherboard, which allows whaever device port you connected to to run...
On a 2001 Ford Escape : The fuel pump inertia switch ( shut - off switch ) is located in the front passenger foot well , behind the kick panel ( there is an access hole ) * the kick panel is the interior trim panel , in front of the front door , by the persons feet
Switch is located on front of gearbox underneath car behind the radiator.