Want this question answered?
V6 or 4cly. ?
the ignition system would be a HEI or high energy ignition with a distributor cap and rotor. this would refer to the 2.8 liter v6
Number one on the distributor cap of a 4.3L V-6 engine would be at the 5:30 location on the cap if you are standing in front of the vehicle with the hood open.
The wire sequence on the distributor cap just goes 1 thru 6, clockwise, starting from the number one position (which should be marked either on the cap or distributor).
The 2004 has all distributorless ignitions. There is no distributor.
On the 2.8L V6 the distributor cap is held on with two screws. Unscrew the two screws and pull straight up on the distributor cap to remove it from the distributor.
The 3.8 liter V6 engine has a distributor cap and rotor in a 1997 Ford Thunderbird
only if it has the 2.5L v6.
what is the plug wire placement on the distributor cap of a1996 gmc 4.3 v6?
Standing in front of the vehicle with the hood open, looking at the distributor, number 1 on the distributor cap would be at the 6 O'Clock position.
The 3.0 L - V6 engine has a distributor cap on the 1993 Ford Ranger The 4 cylinder and 4.0 L - V6 engines are EDIS ( electronic distributorless ignition system )
Standing in front looking at the distributor cap, number one would be at the 5 O'Clock position, from there clockwise it goes, 1, 6, 5, 4, 3, 2.