It's located in very top of rear end housing. Held in by 1 small bolt.
Top of the transmission, over the output shaft.
I own a 97 dodge ram 1500. My Haynes book says the code P0720 Output speed sensor is malfunctioning. My educated guess is it has to do with the cruise control. I will research further.
The output speed sensor on the transmission is also the vehicle speed sensor. The output sensor is the two wire sensor on the front of the trans all the way to the driver side.
The output speed sensor is on the drivers side of the transmission and to the rear. The input sensor and output sensor are beside each other but have different connector types. common symptoms of a failed output sensor are: Speedometer stops working or is intermittent, transmission is stuck in second gear ( limp mode ) .
The output speed sensor is on the rear part of the trans, on the driver side.
Two wire sensor, front, passenger side of the transmission case.
it is an electrical malfunction with the output speed sensor on the transmission.
There are two speed sensors on a 1996 Dodge Avenger, an input speed sensor and an output speed sensor. Both are located on the front of the transmission.
Vehicle speed sensor malfunction. Most likely you have a failed output speed sensor on the transmission.Vehicle speed sensor malfunction. Most likely you have a failed output speed sensor on the transmission.
The outpu speed sensor is a two wire sensor on the front of the trans, far driver side.
Transmission output speed sensor circuit malfunction. The output sensor is located on the driver side rear of the trans.
It is the two wire sensor on the lower rear driver side of the transmission.