Want this question answered?
If you mean ignition timing It is non adjustable The timing is controlled by the vehicles ECU best wishes
Under the timing belt cover. It is driven by the timing belt.
No need for timing marks on the outside of the engine that has no adjustable ignition timing.(DIS)
The distributor is located in a fixed, non-adjustable position. Ignition timing is preset and cannot be adjusted. Ignition timing is controlled by the powertrain control module.
base timing should be set through the distributor with a timing light. hook up one terminal of timing light to #1 cylinder's spark plug wire and other terminal to negative battery terminal. point light at crank pulley and adjust timing by un bolting the distributor and turning it slowly until the mark from the timing light on the block correlates to 16 degrees BTDC. any other electronic ignition timing on a custom tuned vehicle should be altered via tuning software and laptop by a competent high performance tuner.
The D16 ignition timing needs to be set to the middle of the three marks. Typically, these marks are red and are located before the TDC mark on the crank.
under the timing cover
it is located under the timing cover above the crankshaft pulley
how do i set timing on a 2000 Hyundai tiburon
It is located inside the timing cover on the right side of the crankgear
Under the timing belt cover!
what are the timing and marks on an 2000 Hyundai accent