transfer case
The fill plug is on the center of the rear of the transfer case.
It is on the center of the rear of the transfer case.
Fill plug is located on the center rear of the transfer case.Fill plug is located on the center rear of the transfer case.
There is no Transfer case oil. Just Transmission oil and that goes in the dipstick tube after the dipstick is removed. if its a standard there is a plug on the side of the tranny underneat fill to plug level
The fill plug is on the left side of the transfer case. You remove the fill plug, and the fluid should come to the bottom of the fill plug.
The side of the transfer case facing rear will have a fill plug about half way up.
Full it until it starts drizzling out of the fill hole on the transfer case.
Remove the fill plug on the transfer case and see if fluid is up to the edge of the plug!
on the rear of the case there is a fluid fill line next to the fill bolt. Remove fill bolt and stick your finger in.
The 1974 model 203 transfer case has a fluid capacity of 5.5 quarts. You can check the fluid level from the same hole that you fill the transfer case.
Fill plug is located on the center rear of the transfer case
On the back of the case there are two plugs that take a 10mm Allen wrench to remove. The top of the two is the fill plug, fluid should be level with the bottom of the hole.