The 91 Vandura G2500 Instrument Panel Cluster Relay is located on the dashboard.
where is the 91 vandura G2500 Instrument Panel Cluster Relay located :milsunworld@yahoo.com
my 1984 GMC vandura G2500 had a 33 gallon tank
It should be on top of the rear differential.
A G2500 is a 4.3 L 150 hp V6 brand new. so not very fast definately under 100 mph
follow the upper rad hose from the radiator to the engine, it should be in the part that the upper hose connects to and bolted to the engine (if memory serves), this based on a g2500 with a 5.7
no a g30 is a 3500 or 1 ton a g2500 is a 3/4 ton g2500 = G20
I can't speak for the 1990, but on my 1989 it's on the passenger side near the rear axle strapped to the underside of the frame, it's a large cylinder (about 3" diameter) and pretty easy to spot and remove.
Good engine(5.7) Good tranny(4L60E) Good rear end.....Great towing capacity because it is 1 ton w/ 3/4 ton brakes. I am the original owner of a 93' G2500 vandura family wagon and I love it....the way it sits...The sexy curves....It gets pretty good gas milage for it's weight 14+
lack of gas. (bad fuel pump and or clogged fuel filter) Bad spark plugs or plug wires. and mid as well get a new air filter.
A G2500 is a 3/4 ton van and a C2500 is a 2 wheel drive 3/4 ton pickup.
Get yourself to a transmission repair facility quick, that code means the transmission is on it's last legs.just had it happen to me, it means the torque convertor lockup controlled by brake system is screwed up!
Answeri need help nowwwwIt could either be a heavy half (more than 1/2 but not quite 3/4) or a full 3/4 from my understanding.*It is a 1 ton truck frame with 3/4 ton brakes* The brakes are way undersized=That is why The van eats through brakes=I tried to change them to 1 ton and ran into a whole bunch of problems. Mine is a 93' G2500 Vandura.