Want this question answered?
No
The egr valve is located on the top rear of the engine. It bolts on and is easily removed.
Nevermind, I found it. In case someone else needs to know, the expansion valve is located behind the engine and bolts right to the firewall. There are 2 lines going into it that have to be unbolted, and 2 bolts holding the valve to the firewall.
how do yo change the drivers side valve cover gasket on a 1994 toytoa 4runner with a v-6 engine
smack in the middle of the valve cover
The expansion valve is located inside the evaporator core housing on the evaporator core. If you see the large and small pipes coming through the firewall on the passenger side of the engine compartment and trace them into the plastic box behind the glove box, you will find the evaporator core inside this box and the expansion valve is the little aluminum block that is in between those pipes and the evaporator core. It should have a little quarter- like bell on the rear of it. Hope this helps and is in time.
it should be attached to the back of intake manifold ad to the back of the cylinder head
No , the 3.0 liter V6 engine in a 1994 Toyota pickup is NOT an interference engine ( according to the Gates website )
No, it is a Toyota engine.
Check near the tires.
The EGR valve on a 1994 Chevy 1500 is located on the top of the engine. If the valve becomes stopped, the engine could idle rough or stall.
There is NOT an EGR valve on this engine.