0
Where is the AC high pressure switch. on an 01 Chevy Suburban?
Wiki User
∙ 11y ago
the high pressure sensor is mounted on the back of the a/c compressor with a snap ring and sealed with an "o" ring.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
What happens when an oil pressure switch goes bad in a 1999 Chevy Tahoe?
Usually you will not get an accurate oil pressure reading either too high or too low. Occasionally they will leak and pump oil through the switch
Where is the physical location of the AC low pressure valve on a 1997 Chevy Suburban?
all you have to do is fallow the line coming out of the compresser on is the high side the smaller fitting is the low side
How many headlights are on when using high beam on a 1993 Chevy Suburban?
2
What does a ac pressure switch do?
A pressure switch a valve that shuts off the unit when the pressure is to low or to high
Will you lose freon if you replace the ac high pressure switch?
You will definitely lose all of your Freon when you replace the high pressure switch. Once the high pressure switch is loosen the Freon will begin to access the system.
Where is the ac high pressure cutoff switch located at on a 1988 suzuki samurai?
it does not have a high pressure switch all it has is a evaporator temp sensor/switch.
1992 Chevy suburban heater switch only works on high speed?
There is a resistor/ circuit board near the heater motor that need to be replaced. You can get one from almost any auto parts store.
Why would Chevy Suburban dash lights running lights and high beams not work even though the fuses are good?
The headlight switch may be bad. Try replacing. Its the Headlight switch. The switch has a built in Circuit Breaker that self resets. It has become bad and will eventually give it up.
Where is the low pressure air conditioner port on a 1985 Chevy suburban ac?
The low pressure port on any A/C system will be the the line running from the compressor and going into the evaporator in the passengercompartment. The high-pressure port is in the line coming from the condenser in front of the radiator going to the compressor.
What does a high pressure switch do?
a hi pressure switch will limit the pressure by stoping motion (turn off motor) (unload cyclinder) ect
What is differential pressure switch?
A pressure differential switch, is a switch that reacts to pressure difference of two points, usually your supply & return side. If the pressure between these points are high, it then "reacts" notifying of pressure problem on the system.
Where is low pressure fill on 99 suburban?
On a '99 suburban, the low pressure a/c port is on top, towards the back of the compressor, and pointed forward. The high pressure port is there also, just behind it and to the left, pointed straight up.
