Mounted on the upper firewall, driver's side, in front of the brake booster. It will have a reservoir on top that is almost clear plastic that you can see the fluid level through. The Master Cylinder is located right under that reservoir.
In the master cylinder.
Master cylinder. Located on the firewall, driver's side, in front of the brake booster.
Check Brake fluid level in master cylinder and make sure Emergency brake is fully released
It is DOT3. It is listed in your owner's manual and on top of the master cylinder fill cap.
Start with checking the brake fluid level in the master cylinder reservoir. If it is low for whatever reason, those lights will come on.
chek the brake fluid level at the master cylinder, if it is empty, then you have a probable leak and \or air in lines. If it is still full, then it's probably the seals on the piston inside the master brake cylinder.
In the firewall behind the master cylinder.
You start at the brake farthest from the master cylinder. right rear, left rear, right front, left front.You start at the brake farthest from the master cylinder. right rear, left rear, right front, left front.
look on top of the brake pedal or on the master cylinder.
Remove and plug brake lines Remove electrical connections Remove mounting bolts Pull master cylinder off activating rod BENCH BLEED NEW MATER CYLINDER Re-install in reverse order
Look on the firewall driver's side
Master cylinder low on brake fluid or parking brake not totally released