Start with checking the brake fluid level in the master cylinder reservoir. If it is low for whatever reason, those lights will come on.
it is a 2wheel drive, light duty truck. they quit making them, and replaced it with the Dakota
It stays on when the computer detects a malfunction and sets a trouble code.
low coolant or sticking thermostat
Just check your brake lite switch which is located at the brake pedal the switch might be broken that is why your brake lite is always on.
Gwar Lite was created in 1992.
The brake lite switch is right over the brake petal. It faces the driver. If you have Cruise on the truck, that switch is in the same spot. It will have a hose running off it. The brake lite switch only has wires.
Check the lite bulb it is OK check if there is power at the lite when you press peddle/lever.If no power check brake switches and fuses as well as connections on wires.
The signal light flasher on a 1992 Chevy Silverado is under the dash. It is on the driver's side just above the brake pedal.
brake lite switch will keep it in park
The brake light switch is either worn or poorly adjusted. The switch is under the dashboard. The brake pedal mechanism SHOULD cause the switch to trip when you touch the brake pedal. You may need to replace the switch, but the good news is, it's not too difficult, just a couple hand tools. you talking about the tail lites or the dash lite? if its the dash lite your emergency brake might be slightly engaged.
No
i have a 1992 F-150 all of my lights work but my rear passenger side brake lite and signal do not i have changed bulbs and checked all my fuses and wires what do i do?