To access the PCM, you need to remove the cowl. Once the cowl is off, you will see the PCM up in the far corner on the passenger side near the firewall
One reason a 2004 Ford Freestar may stall out is because of a water damaged PCM. This is a common problem with the 2004 Ford Freestar.
I would check and see if you have a transmission or PCM problem.
You can change the PCM yourself, however the PCM needs to be programmed by a dealership service tech.
On a 2004 Ford Ranger ( for the 3.0 and 4.0 liter V6 engines ) In the power distribution box ( which is " live " ) in the engine compartment ( # 47 is the PCM relay ) ( # 48A is the fuel pump relay )
The PCM is only visible after removing the cowl from the vehicle. With the cowl removed, you need to look up in the far corner on the passenger side by the firewall.
Where is the pcm in the chevy venture 3.4 2004
In the truck
The PCM on a 1997 Ford E350 is located under the hood on the drivers side. It is toward the back near the firewall.Ê
the pcm is located along the upper edge of the firewall in the engine compartment..
think its integral to the ecu
in the TRK
The PCM is located behind the right strut, down low in the firewall. PCM meaning Powertrain Control Module.