it will be in one of the valve covers connected to a rubber line. It will be metal and when you shake it, it should rattle.
were is number four cylinder 1997 ford escort
Just to the front and side of the brake master cylinder
ok if you can you can open the bleeder valve on the cylinder and carefully pry the cylinder back into the callipar. you will have to bleed your brakes afterwards.
the dipstick is located between the brake master cylinder and the valve cover.
the pcv will be located on the top of the valve cover with a 3/8th vaccume line connecting to it
On my 1997 Protege a hose runs from the valve cover to the air intake assembly. Where the hose connects to the valve cover is the PCV valve.
Follow the tubing from the master cylinder and it runs into the proportioning valve.
The charging valve is up on the freon line that runs on the driver side engine compartment to the right of the radiator,almost by the air cleaner!
Through the center top of the valve cover.Through the center top of the valve cover.
The Chrysler Sebring knock sensor is located in the engine valve or cylinder located at the back of the motor. This part is in this position next to the engine valve so the sensor can feel the vibration of the engine.
the iac valve (idle air control) is located on top of the intake manifold ,right before the throttle body.
Ford escort horns are usually located behind the bumper.