The PCV Valve itself is on the right bank valve cover (passenger side), directly underneath the air intake plenum. The plenum will need to be removed for access.
The plenum looks like what? Any description or diagram would be helpful. It is a black rubber air pipe approx. 3-1/2 diameter. It runs from the air filter box to the throttle body. It is secured by simple hose clamps and can be removed easily with a flat head screw driver.
The most common place for a PCV valve is on the valve cover.
The pcv valve is located on the right side (passenger side) valve cover. Look towards the back top of the cover you will see the vacume hose going to it, they buried it good.
Pull it out of the valve cover, pull it out of its hose, and reverse the procedure.
The PCV valve on a 1996 Ford Escort 1.9L is located between the engine and the radiator. It is near the vacuum hose.
On a 1996 Ford Ranger , 4.0 : The PCV valve is on top of the drivers side engine valve cover , near the rear of the valve cover
Should be right in the top of one of the valve-covers, with a 3/4" hose connected to it.
rear of intake manifold below upper intake
Where is the PCV valve located on a 4 cyl ford contour and will this if replaced will let my service engine light go off?
The PCV valve for your 1996 Ford Explorer - 5.0 L - V8 engine is at the back of the intake manifold - according to my Haynes repair manual
On top of the valve cover , near the rear of the cover
on top of valve cover protruding from the connecting hose
Locate pcv valve on 1995 ford contour