On 3.0L and 4.0L engines, the PCV valve is mounted in the valve cover near the brake booster. - Haynes Repair Manual #36071 - 1993-2005 Ford Ranger Pickups.
The 1995 Ford Ranger 3.0 liter engine PCV valve can be found on the top of the engine. The PCV valve will be on the back side of the air cleaner.
The PCV valve, on your Ford Ranger 2.5 liter engine, is located on the outside of the air cleaner housing. The valve is on the back of the housing.
Yes, it does have an EGR valve.
where is the valve located on the 2002 ranger 4.0 liter 6 cyl?
Only if you have the 2.5 liter four cylinder engine in a 2001 Ford Ranger . ( that engine has a timing BELT )
You could have the 2.9 liter , the 3.0 liter " Vulcan " or the 4.0 liter V6 engine . They are all over head valve / pushrod designs in a 1992 Ford Ranger
On 2002 Ranger 3.0L, the PCV valve is mounted in the valve cover near the brake booster.
I was looking on fordparts.com at the 2004 Ford Ranger with the 3.0 liter V6 engine and it doesn't list an EGR valve for the 3.0 liter like it does for the 4.0 or 2.3 liter
The 2.3 liter in the Ford Ranger from 1989 to 1997 and the 2.5 liter from 1998 to 2001 use ( 8 ) spark plugs
In a 2001 Ford Ranger : The SuperCab body style holds ( 19.5 U.S. gallons )
I believe it is on the valve cover , drivers side of engine , towards the rear
On your 1989 Ford Ranger : The vacuum modulator valve is on the passenger side of the A4LD automatic transmission ( it might be behind a heat shield )
On a 2001 Ford Ranger : The 4.0 liter Single Over Head Cam , V6 engine has ( 3 ) timing CHAINS
Vents crankcase via carb vac. Typically valve cover/similar. Check your vac hoses & that should help you locate.
The Ford 4.0 liter V6 engine has ( 6 spark plugs )
On a 1998 Ford Ranger : Both the 4.0 liter and the 3.0 liter V6 engines are an ( Over Head Valve ) design
On a 2000 Ford Ranger , 4.0 liter EFI , V6 engine : The PCV valve is on top of the drivers side engine valve cover It is near the rear of the valve cover ( towards the firewall end )
As far as I know the 2.3 liter DOHC engine in a 2008 Ford Ranger has a timing CHAIN
A 2001 Ford F-150 could have a V6 or V8 engine A 2001 Ford Ranger XLT could have a 4 cylinder or the 3.0 or 4.0 liter V6 engine
That would depend on which model year of Ford Ranger in North America : I BELIEVE this is correct : 2.0 liter ( 1983 to 1988 ) 2.3 liter ( 1989 to 1997 ) 2.5 liter ( 1998 to 2001 ) 2.3 liter DOHC ( available in 2001 , 2002 and newer )
.042 - .046 inch
In the top of the valve cover , on the drivers side of the engine , near the rear of the valve cover , next to the firewall
On a 2000 Ford Ranger , 4.0 liter EFI , V6 engine : The PCV valve is on the drivers side engine valve cover , on the top of the valve cover , near the REAR of the cover
( 8 spark plugs ) for your 2001 Ford Ranger 2.5 liter 4 cylinder ( with Fords twin plug ignition system )