Tools Needed:
* Hands * Jack & Jackstands or Ramps Procedure: 1) Lift and support the front end of your car, or drive up on ramps
2) Get under the front of your car. The PCV Valve is located behind the exhaust manifold, a few inches below the valve cover.
3) Push up on the PCV valve to pop it out of the tube, or pull. You can get it out of the rubber tube with some effort.
4) Remove the rubber elbow from the top of the PCV valve. This can be re-used if it's not squishy. It can also be replaced cheaply.
5) Put the elbow on the new PCV Valve
6) Re-attach the elbow to the PCV tube
7) Push the new PCV valve back down into the large rubber tube
it is located in the valve cover
where is the pvc valve on a 2002 ford focus dual overhead cam ztec 2.0
Down behind the engine by the firewall.
the pcv valve is located on top of the valve cover
The PCV valve is an abbreviation for Positive Crankcase Ventilation, which is the recycling of gases of a vehicle. In a 2002 Ford Escort the PCV valve is located in the front of the engine near the drivers side.
Mine was in the bottm corner of the plastic box that holds the air filter
behind the intake manifold
if you have a 2.0 spi motor its in the corner of the valve cover. does not look like a old style pcv valve
On 2002 Ranger 3.0L, the PCV valve is mounted in the valve cover near the brake booster.
Should be in one of the valve covers on top
"Positive Crankcase Ventilation" Catalytic converter burns up oil smoke sucked out of the engine from the PCV.
Locate pcv valve on 1995 ford contour