This PCV valve is slightly different from others. It is threaded on end. It can easily be found and replaced. Locate the front valve cover (nearest to radiator). Locate the 3/8 inch hose connected to the right side of the valve cover. Follow this hose up to the big oval shaped intake box on the top of the engine. Disconnect the hose at the box and there is your PCV valve. it will unscrew from the box. The whole procedure should take about 5 min. Good luck!
What size motor 2.4, 2.7, 3.0 ?
It is threaded into the valve cover. There is a rubber tube that attaches to the valve cover - pull off the tube (there may be a clamp) - then unscrew the PCV valve with a wrench.
The PCV valve on the 2004 Dodge Neon is located on the driver's side of the valve cover. It is a black plastic that matches the plastic of the valve cover. Just look for the hose that leads out of it into the intake manifold. It is easily removed by unscrewing it.
where is the PCV valve located on a 2004 chevy tahoe
On the driver side of the valve cover, threaded into the valve cover. See attached pic.
Where is the pcv valve on 2007 dodge dakota 4.7 mag. Eng.and the egr valve also?
Where's the PCV valve located on a 2004 Toyota Sienna van
The PCV valve on a 2004 Volvo S40 is located on the engine crankcase. It is a small rubber valve.
Remove the PCV valve retaining screws. Remove the PCV valve hose. Reverse the process to install the new PCV valve.
The PCV valve is located in the valve cover, on the 4.7L it is in the side of the oil filler housing.
The 2004 Nissan Xterra PCV valve is located on the outside of the air cleaner housing. The PCV valve can be found on the back of the air cleaner housing.
The PCV valve on a 1991 Dodge Dynasty 3.0 engine is on the passenger side of the vehicle. It is on the crankcase.