if it's the mk7 fiesta, then it should still be in warranty, the column will need greasing if its the mk7.
6.5
It is located in the intake manifold - there are 3 hoses connected via T-piece. The bottom hose goes into the PCV valve.
Nope, pins are different.
Pull upward on the hose that the PCV valve is in. The PCV valve will pull out of the hose. The PCV valve is located in the valve cover.
Disconnect the PCV valve tube from the PCV valve.Disconnect the PCV valve electrical connector if it has one.Turn the PCV valve counterclockwise to remove from the valve cover.To install, reverse the removal procedure.
Remove the PCV valve retaining screws. Remove the PCV valve hose. Reverse the process to install the new PCV valve.
The PCV valve has a check ball in it, That's what you are hearing. REPLACE PCV VALVE
if your asking if that's right then yes. The fiesta does come in a 1.25 zetec from the mk4 up until the mk6.5. im not sure on the new mk7 tho.
The PCV valve is located in the valve cover
The pcv valve is on the passenger side valve cover
The PCV valve on q 2007 Torrent is made into the valve cover. It is not removable, the valve cover and PCV valve must be replaced together.