0
Hi,
The PCV valve is located on the driver side of the engine, in what might be considered the "left-front" corner of the engine.
There should be a link with this question that shows several views of the engine compartment on this van. You can see the valve in a few of those pictures.
Good Luck
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Location of Pvc valve on 2001 Chevy Astro van?
you remove the dog house and it will be on the left valve cover
Where is the PVC valve on a 2001 Chevy Cavalier?
check on the valve cover it is normally inside it on the back part ont the passenger side
Where is the pvc valve located on a 2001 suburban 5.3L?
where is the pcv valve located on a 2001 chevy suburban It is stuck in a rubber hose and pushed into the top rear drivers side valve cover.
Where is PVC located on 2001 maxima?
The PVC valve on a 2001 Maxima is located in the rear valve cover just behind the throttle body.
Where is the PCV valve on a v6 2.8 Chevy Celebrity?
The PVC valve is in the valve cover.
Where is the PCV valve located on a 2003 Chevy Avalanche 5.3?
were and how do you change a PVC valve on a Chevy avalance
How do you change a PCV valve on a 1997 Chevy cavalier?
Were is the PVC valve located
Where is PVC valve for 2001 Hyundai Elantra?
The PCV valve is located in the valve cover.
Where is the PVC valve on a 1998 Chevy S-10?
There is not one.
Where is the Pvc valve on a 2005 Chevy Express Van?
On top of engine
Where is the PVC on a 2001 Chevy Tahoe?
I'm not sure it has one. If it does, it will be on one of the valve covers. PCV means positive crankcase ventilation valve. It ventilates the crankcase. I'm not sure the newer models have one.
How do you change the PVC valve on a 2001 Venture?
First of all it is the PCV valve and not PVC(the plastic). The PCV valve is located on the valve cover towards the front of the vehicle,nearly 4 inches from the oil dipstick. It is inserted in a rubber grommet on the valve cover and is connected to a hose about half an inch in diameter. Both the hose and the grommet are fitted to th PCV valve by merely pressing them in. First press the hose on the PCV valve then seat(press) the PCV valve into the grommet.
