0
Where is the VIN located on the Japanese Honda pc800 motorcycle?
Wiki User
∙ 11y ago
on the title.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
What size speaker fits a Honda PC800 motorcycle?
4"
How can you get pc800-45 rdram to work on my system that requires pc800-40?
FOOL
Where can one purchase a 1G PC800 RDRAM online?
1G PC800 RDRAM and affiliated hardware can be purchased online from generic stockists such as Amazon. Used items could also be sourced from online auction sites such as eBay.
What should one expect to pay for PC800 RDRAM?
There are different options available for PC800 RDRAM, ranging from 128 MB to 1GB. One can expect to pay anywhere from $12.95 to $79.95. The prices also vary from brand to brand.
Can you replace pc800 40 rdram with kvr800x18 256 memory?
KVR800X18/256 is RDRAM. It's specs are: Memory Type: Rambus RDRAM Capacity: 256 MB Pins: 184 Bus Type: PC800 Error Correcting: Yes ECC Memory Speed: 40 ns Data Transfer rate: 800 Mhz Voltage: 2.5 volts.
Is elpida pc800-40 rdram compatible with a dell dimension 8200 1.8 ghz?
if it is non-ecc then it should be fine. go here to get full specs on the system. http://support.dell.com/support/edocs/systems/dim8200/specs.htm#1102278
What are the two current speeds of RIMMs?
RIMMs operate at speeds of 600 MHZ (PC600) or 800 MHz (PC800). All installed RIMMs must operate at the same speed, and have the same ECC or non-ECC rating. The operating speed is different than the data path size. RIMMs are avilable in 16- or 32-bit data path.
Explain different types of ram?
SDRAM (Synchronous DRAM) Almost all systems used to ship with 3.3 volt, 168-pin SDRAM DIMMs. SDRAM is not an extension of older EDO DRAM but a new type of DRAM altogether. SDRAM started out running at 66 MHz, while older fast page mode DRAM and EDO max out at 50 MHz. SDRAM is able to scale to 133 MHz (PC133) officially, and unofficially up to 180MHz or higher. As processors get faster, new generations of memory such as DDR and RDRAM are required to get proper performance. DDR (Double Data Rate SDRAM) DDR basically doubles the rate of data transfer of standard SDRAM by transferring data on the up and down tick of a clock cycle. DDR memory operating at 333MHz actually operates at 166MHz * 2 (aka PC333 / PC2700) or 133MHz*2 (PC266 / PC2100). DDR is a 2.5 volt technology that uses 184 pins in its DIMMs. It is incompatible with SDRAM physically, but uses a similar parallel bus, making it easier to implement than RDRAM, which is a different technology. Rambus DRAM (RDRAM) Despite it's higher price, Intel has given RDRAM it's blessing for the consumer market, and it will be the sole choice of memory for Intel's Pentium 4. RDRAM is a serial memory technology that arrived in three flavors, PC600, PC700, and PC800. PC800 RDRAM has double the maximum throughput of old PC100 SDRAM, but a higher latency. RDRAM designs with multiple channels, such as those in Pentium 4 motherboards, are currently at the top of the heap in memory throughput, especially when paired with PC1066 RDRAM memory. DIMMs vs. RIMMs DRAM comes in two major form factors: DIMMs and RIMMS. DIMMs are 64-bit components, but if used in a motherboard with a dual-channel configuration (like with an Nvidia nForce chipset) you must pair them to get maximum performance. So far there aren't many DDR chipset that use dual-channels. Typically, if you want to add 512 MB of DIMM memory to your machine, you just pop in a 512 MB DIMM if you've got an available slot. DIMMs for SDRAM and DDR are different, and not physically compatible. SDRAM DIMMs have 168-pins and run at 3.3 volts, while DDR DIMMs have 184-pins and run at 2.5 volts. RIMMs use only a 16-bit interface but run at higher speeds than DDR. To get maximum performance, Intel RDRAM chipsets require the use of RIMMs in pairs over a dual-channel 32-bit interface. You have to plan more when upgrading and purchasing RDRAM.
