Want this question answered?
To replace the oxygen sensor on a Honda Odyssey, first unscrew the sensor. Then use a 22 mm socket or 7/8 inch wrench to replace the oxygen sensor.
Is it the back one or is it the front one...?
The HO2S (Heated Oxygen Sensor) bank 1 is between the manifolds and the Cadillac Converter. Manifold Exhaust (T) > "HO2S Sensor" > Cadillac Converter > muffler
How is the wire of o2 sensors in a honda del sol 1993?
For a Honda it will be the sensor on the exhaust manifold that is closest to the radiator ( transverse mounted engine ) for normally mounted engines it would be on the drivers side.
The oxygen sensor on a Honda Civic is replaced by disconnecting the wiring harness and removing the sensor using a socket wrench. Anti-seize paste is applied to the threads, a new sensor is torqued into place, and the wires reconnected.
how to replace the water pump on a 1998 Honda Accord
A system malfunction in the Primary Heated Oxygen Sensor (Primary HO2S) (Sensor 1) heater circuit.The cause can be a loose wire or a defective Primary Oxygen Sensor
THE O2 SENSOR IS LOCATED ON THE MANIFOLD. IT JUST UNSCREWS OFF THE SIDE OF IT, THEN YOU JUST UNPLUG IT.
Oxygen sensor is located at the exhuast Manifold.
All you have to do is look at your exhaust manifold there is a sensor screwed into your manifold ,that is plugged into a connector on the left side of motor unsrew the sensor and unplug the sensor wire and that is all you do and replace with a new sensor really simple fix
This is the "Primary Heated Oxygen Sensor," which *I believe* controls the air/fuel mixture.