there is none If it is the same as the 2007 3.5, it will be beside the Power Steering pump. behind the hoisting bracket. it will have a black valve stem cap on it. unscrew the cap and MASH the valve stem, Be careful, it has pressure.
Where is the EGR unit located on a 2001 Chevy Impala? picture please
Not sure but, if it does have a bleeder it would be located at the highest point where the coolant flows in the engine.
Doesn't have a cooling system bleeder valve.
95 Chevy impala egr valve removal
If you mean the coolant bleeder valve, it doesn't have one.
The bleeder valve for the brakes on a 1997 Ford Ranger is located in the brake line where it meets the brake disc. The wheel will have to be removed to access the bleeder screw for drum brakes.
tell me where is the egr valve located please the egr valve is usually located on the top right of the intake manifold on top of the engine so if your facing the engine, look down to your right
There is no bleeder valve in the heater system of that vehicle.
The bleeder valve is a 8mm bolt for the rears located on top of the drum or on the caliper itself if you have disk rear brakes. For the front, a 10mm bolt is located on the caliper itself. PB blaster should be used to be sure the bleeder valve is not broken
The PVC valve on a 1994 impala is located on the valve cover. It is close to the dip stick end.
The AC recharge valve on a 2001 Chevy Impala 3.4L V6 is near the firewall. It is the larger of the two tubing.
on top left facing engine,it is a small valve on top of pump!! on v6.