Want this question answered?
Type your answer here... Why are you wanting to rewire the brake lights?
Check the stop light switch for alignment or perhaps defect
Remove the plastic cover over the switch at the clutch pedal. The CRX switch can be unscrewed and replaced by disconnecting the wires and twisting the switch out.
CRX
main relay switch may need to be changed.
Honda CRX was built from Honda Civic platform and shared many components with the Civic. All Honda CRX models have a mechanical fuel pump that can be easily located within the engine bay, making fuel-pump replacement much easier than on some newer cars.?æ
The 1986 Honda CRX already has a 1.5.
Civic Racing eXperiment = CRX
Honda produced the CRX from 1983 to 1991. Honda is releasing a car in 2011 called the CR-Z, it is a hybrid remake of the CRX. Check it out!
Scan it with an OBD2 scan tool.
the brake light switch is behind the brake pedal just adjust it all the way out and brakes will come back on switch generally will not go bad but my crx and mr2 both have needed adjustments if the switch is bad go to radio shack and buy a momentary pushbutton clamp it to the same pillar switch over both wires and let there be brake lights luckily by 98 civic hasn't need this yet but im burning threw transmissions like it was fun to swap them. anyone else?
Check your brake pedal, follow it up into the under dash. You should see where the pedal stop meets a bar with a switch attached. The rubber piece that triggers the swith to shut off the light when the brake is released probably broke off which leaves a hole in the pedal bar for the button on the switch to go through without being depressed to shut off the light.