Changing the brake light relay switch on your 1999 Chevy Cavalier is quite easy. The brake light switch simply plugs in and out.
The 1999 Chevrolet Malibu brake light switch can be found beneath the dashboard, next to the brake pedal. The brake light switch simply plugs in and out.
what does it mean if my brake light is blinking on and off when its pushed down in my 1999 Chevy silverado
where is the drake light switch on a 1999 chevy s10. The brake light switch is located just above the brake pedal. You will need a flashlight to see it.
The brake light switch is either broken or out of adjustment. The switch is located above the brake pedal.
The brake light switch is behind the brake pedal.
To change the brake light switch on a 1999 Deville, remove the screws on the switch. It is located right on top of the brake pedal under the dash. It works as an open circuit.
follow the brake pedal to the house, and you will see the harness behind that. follow that harness and it will lead to a second plug that you can access on work on
Bent brake light switch bracket above the brake pedal.
It could be the brake light switch (the switch that activates the brake lights when you step on the brake pedal) has gone bad
If you're positive it's not the bulbs (you know this because you checked them with a meter or tested the outlet with a test light maybe) or switch, check it out for a bad ground.
Brake light switch out of adjustment or defective
If you mean (brake light) switch, the answer is yes. It is located at the top part of the brake pedal assembley.
It is on a bracket just above the brake pedal.
Most brake light switches are mounted to the brake pedal up towards the dash board
Fuse and/or switch Switch located at upper end of brake pedal under dash
It is on a bracket, just above the brake pedal.
Replace brake light switch.
Brake Lights "Stuck" ONUsually that is caused by the brake light switch becoming "out of adjustment," but sometimes it can be caused by a defective brake light switch.
Replace the switch.
Brake light switch on the brake pedal is defective
There are a couple of reasons a 1999 Chevy Silverado third brake light will not work. The first may be that the light bulb is burnt out. If replacing the bulb does not work, there may be loose wires to the connection causing it to not work.
Look at the upper end of the brake pedal almost under dash
Yes. It could be a blown brake light fuse or a faulty brake light switch.
Possibly blown fuse, bad brake light switch, or blown brake light bulbs.