Want this question answered?
There is usually a reset button.
Press and hold the trip reset button while you are on the trip meter.
Chrysler/Dodge/Jeep vehicles do not use inertia/reset switches.
You can not reset the odometer. The trip meter can be reset by holding down the button.
You cannot reset a speedometer. You can reset the trip meter but not the odometer. Reset the trip meter by pushing and holding the trip button.
Push the reset button just to the right of the trip odometer
there is no reset button there is a circuit opening relay under the dash you can check it with an oms meter
What year is the vehicle? On my 2006, there is a button beside the little window at the bottom of the speedometer. Short presses cycles between odometer, trip meter 1 and trip meter 2. While displaying the trip meter, press and hold the button for about 2 seconds. The trip meter will reset to zero.
Resetting the maintenance LightSwitch the display to the trip meter A when the engine is running.Vehicles with smart key system:Turn the "ENGINE START STOP" switch off.Vehicles without smart key system:Turn the engine switch to the "LOCK" position.Vehicles with smart key system:While pressing the trip meter reset button, set the "ENGINE START STOP" switch to IGNITION ON mode (but do not start the engine because otherwise the reset mode will be canceled).Continue to press and hold the trip meter reset button until the trip meter displays "000000".Vehicles without smart key system:While pressing the trip meter reset button, set the engine switch to "ON" position (but do not start the engine because otherwise the reset mode will be canceled). Continue to press and holdthe trip meter reset button until the trip meter displays "000000".
# Turn off the engine with the trip meter A reading shown. # With your foot 'off' the brake, press the "Engine Start Stop" button once The radio display will light and radio will come on, but instrument gauges do not. # Then, while pressing the trip meter reset button, push the "ENGINE START STOP" button or engine switch ON (keeping your foot 'off' the brake, Don't start engine, just push the start button until radio and display comes on #Without multi-information displayContinue to press and hold the trip meter reset button until the trip meter displays 000000. With multi-information displayContinue to press and hold the trip meter reset button until "COMPLETE" appears on the multi-information display
Ignition position I Press and hold in the reset button for the trip odometer Turn the key to position II within 2 seconds. Keep holding the reset button for the trip meter pressed in until yellow lamp will light when the reset button must be released. Release the reset button for the trip odometer within 4 seconds. The instrument gives an audible signal when resetting has succeeded If the trip meter is already reset the reset button should be held in for a minimum of 10 seconds and a maximum of 14 seconds. If the reset button for the trip odometer is not released within 4 seconds and before the light stops flashing, the service reminder indicator is not reset.
my 2001 Passat : 1)Press and hold down the trip meter button with your right hand 2)Still holding the trip meter button down turn the ignition on with your left hand 3)Still holding the trip meter button down turn the clock resetting button to the right with your left hand. If the Leon's clock isn't reset by this method then you will need to press or turn the knob that sets the minutes. You will also have to reset the clock afterwards.