my 2001 Passat :
1)Press and hold down the trip meter button with your right hand
2)Still holding the trip meter button down turn the ignition on with your left hand
3)Still holding the trip meter button down turn the clock resetting button to the right with your left hand. If the Leon's clock isn't reset by this method then you will need to press or turn the knob that sets the minutes.
You will also have to reset the clock afterwards.
you tell me
2009
You would have to have service B performed by a authorized Mercedes Benz technician. There is a special laptop they hook up to the cars after these services are performed in order to get rid of that message on your dash. On the CLK 320 Cabrolet you have to perform a series of actions on your dash i.e. reset button etc. to reset the service reminder. There is no plug in for a Mercedes techniciam to reset the reminder.
Mercedes vito Service Reminder Reset
i dont now
How_do_you_reset_the_service_now_display_on_2006_volkswagen_passat
servis ansp vw 98
The 2007 VW Passat has a 'SERVICE NOW' message the triggers every 5k miles. This usually has to do with the oil change. You can reset it by doing the following. With the key sitting in the ignition but NOT on (not even accessories...the key is in in there but literally just about to fall out) push and hold the wrench button (on the dashboard). Count 5 seconds, start the car while still pushing the wrench button and then push the min button on your clock. You must be holding the wrench button and the min button at the same time to reset the service message. To test if you've reset properly, turn the car off and start it again. If you've reset properly the 'SERVICE NOW' will not appear and is automatically reset for 5k miles.
How do you reset service indicator message for A 1999 Mercedes Benz ML320 after service A or B is completed?
Hit the step button until you see 0km to service the hold down the reset button.
You need VAGCOM software to do so.
Resetting the Service Reminder DisplayCaution!Do not reset the service reminder between service intervals; otherwise, incorrect information will be displayed.Switch off the ignition.Push and hold down the reset "0.0/set" button.Switch on the ignition.Release the "0.0/set" button and push the clock setting button within 20 seconds.