Climb up and lean over the top of the engine and look at the right rear corner of the intake and you will see it tucked in under the intake. It is right beside the oil sending unit. It is hard to see but it's there.
1996 and later models-the camshaft position sensor is located on the back of the distributor, drivers side.the loss of the camshaft position sensor signal will not affect the driveability of the vehicle. whoops,that sensor is located in the distributor,the one on the back is the ignition module.
Most Camshaft Positioning Sensors are "Plug and play", if not I do not recommend playing with it if you are unsure have a mechanic do it.
The 2000 Chevrolet Silverado 1500 4 x 4 camshaft sensor can be found on the back of the engine head. The camshaft sensor will be labeled as such.
there are many different things that it could be check the camshaft positioning sensor, the throttle positioning sensor, and the crankshaft positioning sensor.
were is the cam shaft sensor
where is the camshaft exhaust positioning sensor on the in-line 5 cylinder motor, 2006 hummer h3
To change the camshaft positioning sensor on a 98 GMC Jimmy you need to first locate it. The sensor is located within the distributor. Next, unbolt the old sensor and replace with a new sensor.
where is the cam sensor located on a 2001 silverado ?
pro
The 2003 Mazda camshaft position in sensor can be found on the back of the left-hand cylinder head. The camshaft position sensor should be labeled as such.
Inside the distributor.
have never heard of a cam angle sensor. the cam does not change angle.it stays put in the bearings