There is not a obd connection for any 86-93 model b series trucks.The computers on the carburated trucks soley runs the emissions systems and on the trucks like the b2600 fuel injected the computer runs the same components along with the injectors.To diagnos problems it soley is from symptoms and read into say a chiltons or haynes for possible issues to isolate it.Sorry there is not a better way to my knowledge.
950.00
At the top of the clutch pedal in the cab of the truck.
The weight of the truck is on the driver side on the inside of the door jamb.Simply open your door and look down to the right.This will have the weight of the truck on a printed laminated sticker.
in front of the center console on the floor mat
Remove the inside of the glove box and look in and down to the right and you will see it.
physically it will fit but the wire harness and computer are not compatible.
A pineapple grenade because you are about to mess up the 88 truck has a weak motor prob don't have as much power as the 305 vortec don't do it get computer and motor from a vortec to put in the truck
It's the one closest to the crankshaft pulley, or the front of the engine, the front of the truck. Assuming it's an inline engine, not a v.
It is located under the thermostat housing with a single wire connection.And the upper radiator hose goes to the thermostat housing.
Unhook the NEG. battery cable for about 5 mins, then hook it back up and go drive the truck normal about 10 miles. That's it.
complicated
Who is a valve calibration for mazda b2200 1988