The computer module is in back of the glove compartment. The computer module is in back of the glove compartment. The computer module is in back of the glove compartment. If have a 2003 and it might be in the same place. It is located behind the right rear panel the the truck space. First you pull off the RR seat belt panel then pull back the lower panel. You will see a green plug and the computer module is right below it. There should the a sticker with your five digit code. It all snaps back in place. My local Mercury dealer wanted $42.50 for this info. Good luck.
The code is on a sticker on the top of the control module.
The computer module in a 2003 Mercury Mountaineer is located behind the rear right panel in the truck space. The rear right seat belt panel must be removed and then the lower panel. The module is located beneath a green plug.
the door code is on top of the computer module, it is five numbers together sometimes you have to enter the numbers in reverse order, try entering the numbers if they dont work try them reversed
Should be on the computer module in the left rear above the wheel well inside.
A person should know the general location of the electronic parts of their car. The Computer module in this car is located in the drivers side rear compartment close to the jack.Ê
behind the radio, to the left
The best way to troubleshoot your GEM module on your Mercury is with a diagnostic tester. The diagnostic tester will tell you if the module is working properly.
Under the hood, on the firewall, on the passenger side, highup right near the top. About a 8" wide plug connection.
Usually it is near the left kick panel behind the fuse box. Sometimes it is mounted on the right side of the vehicle.
The 1999 Mercury Sable computer module can be located behind the passenger side dashboard. The dashboard will need to be removed in order to view the computer module.
they say that the computer module on the 2004 model is in the back of the glove compartment. however, in the previous models, like the 2003, it is in the plastic molding between the third and second window on the passenger side. there you will find your 5 digit code
On a 1999 Mercury Mountaineer : The Powertrain Control Module ( PCM ) is in the engine compartment , passing through the firewall . From the engine compartment , towards the passenger side of the engine compartment , you will see where the wiring harness is bolted to one end of the PCM at the firewall ( most of the PCM is " hidden " behind the glove compartment )