The crankshaft position sensor is mounted behind the passenger side cylinder head, under the transmission dipstick tube, into the top of the bell housing.
The camshaft position sensor is located under the distributor cap. If you remove the cap, you will feel a plastic plate under it. Pull up on it and it will come loose. Unplug it from the wire connector.
The crankshaft position sensor on a 1998 3.0 dodge caravan is located on the top of the bellhousing towards the firewall.
The crankshaft position sensor on a 2005 dodge grand caravan is mounted on the upper side of the bell housing and can be easily accessed from the top.
The crankshaft position sensor on a Dodge 5.9L V8 is located behind the passenger side cylinder head, and it aims at the flywheel through a hole in the bell housing.
The crankshaft sensor is located directly above the oil filter housing by the alternator.
The crankshaft position sensor is located at the lower left hand side of the crankshaft pulley. The crankshaft pulley is the large pulley located in the center lower portion of the front of the engine.
The crankshaft position sensor is located on the rear of the engine, on the driver's side just below the distributor.
Just below the starter.
The crankshaft position sensor is located on the top of the transmission. It is located close to the bell housing.
a 1993 doesn't have a cam sensor. the crankshaft position sensor is located on the front of the engine directly above the crankshaft pulley
The crankshaft position sensor on a 2005 dodge caravan is mounted on the top side of the bell-housing.
On the right side of the engine Block manafold
The crankshaft sensor on a 2005 Dodge Stratus 2. 4 Liter is located on the bottom of the engine, near the oil filter. It constantly monitors the rotation of the crankshaft and updates the vehicle's computer on its current state.