Want this question answered?
the crank sensor is located behind the main accessory drive pulley which is installed at the end of the crankshaft you have to remove the pulley and the plastic cover that covers the timing belt
sounds like the water pump is leaking
It's located next to the crankshaft pulley (the timing belt is going around it). You will not miss it. There is only one sensor there.
Behind the timing belt. The timing belt drives the water pump with the pump's pulley.
It is located behind the crankshaft pulley and requires the pulley to be removed to change it out.
The crankshaft position sensor is located at the lower left hand side of the crankshaft pulley. The crankshaft pulley is the large pulley located in the center lower portion of the front of the engine.
the crankshaft sensor is located behind the crank pulley. the bottom pulley
On the front of the engine. It keeps the belt tight.
on the Chrysler engine (420a) you do need a puller and installer to deal with the crankshaft dampener pulley.
yes
right side of crankshaft pulley
Hello! The crankshaft position sensor is located behind the crankshaft pulley,on the left side facing the front of the car.It is difficult to see and to remove it you need to remove the crankshaft pulley ( radiator,belts,.... )