3.1 is distributorless ( has no distributor ). Ignition module with coil packs (3) should be the set up.
Where is cam shaft position sensor on a 4.3 engine. Located?
on an '88 olds the main engine control module is in the base of the distributor. This was a car before OBD1 systems --------- Whoever wrote this has no idea what they are talking about. This car has no distributor, it is OBD 1.
It is located on the distributor under the cap and rotor Crank sensor should be on the front bottom of engine by the crank pulley
1 - 8 - 4 - 3 - 6 - 5 - 7 - 2 The engine cylinders spark plug locations are numbered : firewall 8 - 7 6 - 5 4 - 3 2 - 1 front ( if this is the 350 in the 1976 Oldsmobile Omega with the front located distributor the distributor rotor turns CLOCKWISE and the # 1 position on the distributor cap faces to the front and slightly towards the passenger side ) --------------------------------------------------------------------------------------------------------- The Olds 350 with the rear located distributor , the distributor rotor turns COUNTERCLOCKWISE and the # 1 position on the distributor cap faces to the front and slightly towards the drivers side
In the distributor .
There is no "distributor" on a 350z.
Where is a suzuki 1997 sidekick distributor located?"
It does not have a distributor.
where is the emc located on a 1988 olds cutlass?
There isn't a distributor cap it has a coil pack and it is located in the front passenger side it is a rectangular box that the plug wires are connected to
The distributor cap is located where the spark plugs cables are connected .They go from the motor to the distributor cap.
Remove the upper intake and there it is.