The EAC or electronic accelerator control may show an error message upon starting. In the Ford Fiesta 1.4 2002 model this usually means a new module. This repair can only be done by a dealer. When the EAC message comes up, in many cases the car can still be driven for a limited time with a simple restart.
My EAC failed light came on in my Fiesta 1.4LX 53 reg. and the car would do peculiar things and lose power. Changed the accelerator pedal - cost about £80 and was a five minute DIY job involving four screws and a plug inside the car! Car not failed in the last six months!! Hopefully, fingers crossed, problem solved. EAC, I believe, stands for Electronic Accelerator Control - the module bit is on the pedal.
boot
how is it my heater control on my ford fiesta flight 1998 only works on no. 4
You can find the Ford Focus ignition control module beneath the drivers side dashboard. The ignition control module will be above the accelerator pedal.
Ford Fiesta was created in 2008.
its behind the air filter
a ford fiesta 1.6
ford fiesta
Fiesta's have a common fault with the heater control valve failing closed. You can get a new one from Eaby for £15
replace ford fiesta clock
its screwed in the right hand side of the engine
AutoZone!