Where is the engine coolant temperature sensor on a 2002 Chevrolet Blazer?
It is located on the intake manifold near the thermostat housing.
Location of engine coolant temperature sensor on 1994 Chevrolet Blazer s10 v6 4.3 liter vortex engine?
Drain about 1 gallon of coolant from radiator Remove housing at engine end of upper radiator hose Make note how thermostat is installed Clean both surfaces Install new thermostat and gasket Re-fill coolant slowly to prevent an "airlock" Start engine and watch for leaks Run engine to normal operating temperature with heater on Check coolant level
If your talking about the Chevrolet K5 Blazer made from 1969-1994, the most powerful engine was the 350 ci Small-Block V8 engine that puts out 255 hp and was available from 1969-1970. If your talking about the Chevrolet S-10 Blazer and the Chevrolet Blazer made from 1983-2005, the most powerful engine is the 4.3L Vortec 4300 L35 CPFI V6 engine that puts out 200 hp and was available from 1992-1994.
Where is the coolant temperature sensor located on a 1993 Nissan Altima gxe with a 2.4 liter engine?
Engine Coolant Temperature (ECT) Sensor 4.6L Engine Coolant Temperature (ECT) Sensor is on left side of the alternator according to the pictures on my Chilton's book. 5.4L Engine Coolant Temperature (ECT) Sensor is on right side between the alternator and the top radiator hose / thermostat housing according to the pictures on my Chilton's book.
The thermostat in a car regulates the coolant temperature inside the engine. When the engine is cold, the thermostat is closed, allowing the heat from the combustion chamber to heat the fluid (coolant) in the coolant galleys in the engine block. Once the engine reaches an optimal temperature, the thermostat opens, allowing coolant to flow through the radiator. The thermostat then controls the flow of coolant to hold the engine at its optimum operating temperature…