0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What color is the ground wire on the high beam for a 1999 dodge ram 1500?
The ground wire at the bulbs is black.
How do i test power to the coil on a 99 dodge ram 1500 truck and which wires are which?
The dark green/Orange wire should have 12 volts while cranking or with the engine running. The other wire will be pulsed to ground by the engine computer.
Where is the anti theft wire in the 2007 dodge charger?
There isn't a single "anti theft" wire. The anti theft system is very complex.
What wire is the hot wire and ground wire in a 1990 cutlass supreme?
the hot wire goes to the starter and the ground wire bolts to the engine block.
Where is the ground wire for a1982 Chevy Celeberty?
The battery ground wire runs from the battery to the engine block.
Where is the ground wire on the alternator in a 1999 Pontiac Grand Am?
There is no ground wire.... it grounds through where it touches the engine
Where do I find the reverse light power wire on a 2003 Dodge Ram 2500 and what color is it. Did Dodge use the traditional black wire for the ground?
Purple wire black stripe.
Where is the ground engine wire that goes to the chassis or car?
The ground wire leads from the negative side of the battery and connects either to the engine block or to the frame of the automobile.
Where does the positive and negative go on a starter for a 1993 dodge intrepid?
The positive goes on the large stud. The engine ground wire goes under the center starter bolt.
Where is the ground wire for the radio in a 2001 dodge neon?
The 2001 Dodge Neon standard radio is grounded to the radio retaining screws. When you install the radio simply attached the ground wire to the radio retaining screws.
What color is the ground wire in a 2000 dodge ram stereo?
Yellow and black
How do you check an engine for spark?
Remove the spark plug wire from the spark plug. Use some heavy gloves or a set of insulated pliers to hold the spark plug wire about 1/4-inch from the engine block (ground) and crank the engine - you should see a spark jump from the wire to the engine ground. For a better check, use another spark plug and put it on the spark plug wire and use it as a "jumper" from the wire to the engine ground.
