Want this question answered?
I think it is located in the engine compartment, not on the gas tank.
The canister purge solenoid draws gas fumes out of the charcoal canister
The computer on the car purges the evap canister automatically by activating the purge solenoid.The computer on the car purges the evap canister automatically by activating the purge solenoid.
The canister purge solenoid draws gas fumes out of the charcoal canister
by the tank or evap canister
where is the canister purge valve located on a 03 chevy venture
Its a Canister Purge Control Solenoid
Remove the engine sight shield. Remove the evaporative emission (EVAP) line from the canister purge solenoid, perform the following: * Push the large size white retainer portion in. * Push down, while pulling up slightly in order the disengage the tube. Disconnect the EVAP canister purge solenoid electrical connector Remove the EVAP canister purge solenoid bolt Remove the EVAP canister purge solenoid and insulator Reinstall in reverse order....... toque spec is 91 inch lbs
Its a Canister Purge Control Solenoid
where is the evaporator on a suzuki Sx4
ECM has detected pressure in the EVAO system during a non-purge condition 1. Purge or vent solenoid failure 2. Plugged EVAP canister condition 3. Failed EVAP pressure sensor
The purge valve on the Malibu is located on top of the charcoal canister that is mounted on the side of, or in close relation to the fuel tank. Usually on the same side as the filler neck. This purge valve is not to be confused with the purge valve solenoid which is located on the intake manifold. If for some reason you can not find the purge valve/canister just locate the solenoid on the intake manifold (which will have an electrical plug and one vaccum line attached to it.) and trace the vaccum line under the car to the canister. As stated above...it is there that you will find the canister purge valve.