it is located on the passenger side of the firewall you first have to vac your system or just let the pressure off unbolt your lines 13mm and unbolt your valve be sure to use new gaskets
the expansion valve is on the passenger side firewall in the engine compartment.
How do you change the ac expansion valve on a 2001 Honda civic
It is on the evaporator, inside the vehicle, under the trim on the right rear.
I believe it just pulls out
It doesn't have an Egr valve.It doesn't have an Egr valve.
You must remove the evaporator case from behind the glovebox and disassemble it. The expansion valve is mounted to the evaporator.
Under the glove box it is in a big black box it
Looking at the engine from the front bumper the front expansion valve is located on the far left low on the fire wall. Follow the ac lines down and it leads to the expansion valve mounted on the fire wall. The best way to access it is to remove the inner fender well behind the passenger side front wheel.
Plugs, wires, cap, rotor, air filter, pcv valve.
99 Durango doesn't have a Heater Control Valve, It only has a thermostat
The 2001 Dodge Durango has a V8 engine.
On that truck you do not have an orifice tube but what you do have is called an expansion block or also known as an H-valve and there are two if you have a dual a/c system..........