Want this question answered?
On a 1999 Ford Windstar, the expansion valve is located just inside the rear hatch of the rear panel on the driver's side. It is connected to the rear evaporator core.
The orfice tube is located in the evaporator inlet tube. There is also an expansion valve in the rear evaporator case.
The "Related Question" below is an extensive discussion on the 1999-2003 temperature control valve / heater control valve. It is likely the information will be similar to the 1997 / 1998 Windstar
The battery group is 65N for a 2003 Ford Windstar
On a 2003 Ford Windstar : The cargo area is behind the rear seat
The rear expansion valve on a 2002 Windstar is located behind the left rear panel(driver's side cover just inside the rear hatch spanning to the left side door) The expansion valve is in-line and connected to the rear evaperator core. It has a nut style fitting on each end so you will need to hold the valve in place when loosening/tightening the fittings. You can do this with an open end wrench. Mke sure to recover your freon before attempting to remove due to high pressures on the system. The 2003 should be located in the same place. I hope this helps you.
exactly where is of 02 oxigen sensor the ford windstar 2003
The 3.8 liter V6 engine in a 2003 Ford Windstar has a timing CHAIN
electric window binds on 2003 ford windstar
The last model year for the Ford Windstar ( in North America ) was ( 2003 )
According to the 2003 Ford Windstar Owner Guide : ( No ) use " regular " unleaded gasoline , 87 octane
The last model year of the Ford Windstar was ( 2003 )