Want this question answered?
Pictures that show what wires do and where they run. Shows colors and connectors.
Im guessing this integra has an automatic transmission in it. The reason I say this is because it sounds like your trany is about shot. I realy can't say this is the problem without taking a look at it myself. PeaceAnswerProbably needs a tune up.you should check first your plugs and then the throttle cable if this does not help you then you need to take it in
The EGR valve is directly under the hood on the 89 Cavalier.
If I understand the question correctly, you're wondering what cars the '87 Integra engine will fit in. The only car I know for a fact that it will fit with modifications to wiring and ECU would be the Honda CRX, I'm unsure of the years but it shouldn't be too hard to find. If you're wondering what engines will fit in the '87 Integra, there aren't many alternatives. There's the '88-'89 Integra engines, those have an extra 5 horses over the '86-'87 engines but you will have to redo wiring and get a new ECU. A better choice would be the JDM Browntop Integra ZC. A direct swap with no modification required and has around 30 more horses than the stock engine.
In the radiator.
Have the same problem with '95 Integra; horn and stop light fuse goes repeatedly Checking the brake lights sockets wiring, hoping its there then the switch on the brake pedal then (groan) start looking at the internal wiring
On the 4 cylinder models, it is on the passenger side of the valve cover.
I believe the crx si came with a d series engine, unless it was a jdm crx. basically if your crx has a single over head cam motor ( SOHC ) then it is D series which means no your crx tranny can not bolt up to an integra. Since integras are all B series engines or Dual over head cam ( DOHC ) usuall the b18a1 or b1 unless gsr .
Any auto parts store can help you with that.
The Exhaust Gas Recirculation Valve on a 1989 S10 is located in the valve cover. It is toward the front of the motor.
Out of time or a burnt valve
the 89 with the 360 has the pcv valve in line behind the carburator.