where is flasher location on 2008 t300 kenworth
The fuses and relays are located in the kick panel behind the clutch pedal.
The flasher is internal to the body computer,
You need a different Flasher Relay. I cannot tell you which one, as you have gone to a non-stock configuration. You need a relay with more resistance. The 2008 Ram doesn't have a flasher relay. The lights are controlled by the TIPM ( the computer on the underhood fuse box ). You will need to add a resistor to the led lights to bring the total resistance up to the same amount that the normal bulbs have if you want it to flash at the normal rate.
I just had to change mine last week. It's in the fuse panel, relay #08.
answer: i just did it today 4/10/08 you have to remove about 10 screws you need a torque wrench set and a 7mm. socket . remove or just loosen up the 2 or 3 bottom panels underneath the steering column the signal relay and hazard relay are right next to each other next to the cigarette lighter housing but behind the panels that you have to remove . i pulled it out with a needle nose plyers. not bad it took me 30 min. or less the relay was $10 at the dealer . i hope this helped you...
The world record for the fastest 4x400 relay race is 2:55.39 and it was set by LaShawn Merritt, Angelo Taylor, David Neville, and Jeremy Wariner on the 23rd of August, 2008 at Bejing Olympics. 02008-08-23
No. Only the '07-'08 Aura, Outlook, Sky and the '06-'07 Relay use transponder chip keys
Check the window relay for the back windows of the Le Sabre. Check the wiring for the system as well.
Leading off the US team in the 4x100 free relay at the 08 olympics when they out-touched france at the very end of the race. Splits were 23.31 and 24.20 if u were wondering.
08/08/08
08:08:08
08 08 08= August 8, 2008 09 09 09= September 9, 2009
me was born on 08-08-1980 ! Issouiken morocco!!!