I need to where the transmission fill is located on my 1993 chevy caprice classic.
Why the defrost may not work in a 1993 Chevy Caprice Classic could be because the heating core is out.
Why the heater or defroster may not work in a 1993 Chevy Caprice Classic because of the heating core is going out.
In the fuel tank
it is what the coils are mounted too.
What is the engine in the Caprice? In the Suburban? If they are a 305/350 then they can be interchanged. I have a 1985 Caprice Classic with a 305 and the tranny came out of a 1987 Suburban. It depends on the engine.
The 1993 Chevy Caprice Classic drivers side door panel is held in place with for retaining bolts and 10 retaining clips. Remove the retaining bolts and pry outward on each retaining clip.
In the '95-'96 caprices there was a 4.3 or if you have an ex-cop car there is a 5.7 h.o.
It is very possible i have seen it done dozens of times.
It is the Intake Manifold Gaskets FYIilikebananas
To replace your heater core on a 1993 caprice, you will need a screwdriver, a socket wrench, and a weather seal adhesive.
I personaly think it did not die.
passenger side before the fueltank up under the body It is mounted on the frame ahead of the passenger rear tire
Needs a tune up
What is your question? how do bypass pass key but i no longer have the key for my 1996 caprice
Entirely different dash... 1994 - 1996 is the same
if it has a 5.7 ltr then yes the bolt patterns for the 5.7 have been the same sense there firt production.
The 4L60 4-speed auto
Pull the inside door panel off, find the switches, their will be a black rectangular clip holding them in the armrest. jr
1993 Caprices didn't have 3-speed trannys
Above the passengers side lower control arm.
Mounted inside and on top of the fuel tank.
It is not possible to replace the trunk lock on a 1993 Caprice Classic while the trunk is closed. A person will have to remove the back seat, crawl into the trunk and open the lock manually before it can be replaced.