The Heater core is difficult to replace on the F150 since it is buried in the plenum box. Getting to the core involves removing the steering wheel, steering column, complete dash panel, evacuating the AC, draining the radiator, and finally removing the heater box. Once you have the box out(8-12hrs), the core is simple to replace.
You want to be sure that the core is the problem before you undertake this process. If there is a strong smell of antifreeze in the cab or a puddle of coolant on the floor, the diagnosis is easy.
Check that the radiator is full, not the overflow tank, the radiator. On a cold engine you can remove the radiator cap and check the level. It should be full. If there is air in the system it will affect cab heating and engine cooling.
Another good check is to feel the two heater hoses going into the firewall from a cold start. The hoses should warm up at about the same rate and get uncomfortably hot-close to radiator temperature.
If the core appears to be OK, the next concern is with the blend door that diverts air through the heater core. This is a common failure on the F150. We have a video posted on our web site that shows how to diagnose and repair the system. Please follow my user name back to my bio page to find a cut-and-paste link to the web site. You are only a few clicks away from solving the problems.
heater core hoses not hot
The 1996 GMC half ton pickup truck heater core can be removed by removing the heater core retaining bolts. Remove the heater core water lines. Reverse the process to install the new heater core.
No
Simply disconnect the heater hoses going to and from the heater, (Inlet & Outlet) at the firewall. Purchase the proper size hose coupling that will allow you to connect the 2 hoses together. Do not plug these hoses, just connect them together. The coolant will now not flow through the heater core.
Try flushing the coolant system out
what is the year model? 1995
Is there any difference in replacing the heater core in the 2002 as opposed to an earlier model such as the 1997 ?...or is it pretty much the same job ?
how do you remove the heater core and hoses from 1996 Chevy sub 5.7 K1500
Look up under the passenger's side dash close to the kick panel, and you will see a heater case. there on the front is a removable cover, held on with several 7mm screws. Remove that cover, disconnect the heater hoses under the hood, and replace the core. Reassembly is in reverse order of removal.
The 1996 Geo Prizm heater core is located behind the kick plate on the passenger side of the passenger compartment. The kick plate will need to be removed in order to view the heater core.
how to replace a heater core on 1994 impala ss
on a 1993 4.9 it is just to the left of the thermostat where the radiator hose and heater core hoses go into the thermostat it has a couple of wires running into it.