Inside the vehicle, under the dash, passenger side, next to the firewall. Raise the hood and find the heater hoses going to the heater core. This will tell you the location inside the vehicle.
Because its a 1988 Buick LeSabre
FUEL FILTER ON 1988 BUICK LASABRE IS LOCATED DRIVERS SIDE IN FRONT ON REAR WHEEL ALONG FRAME.
in the gas tank
under the glove box. remove the cover under the glove box the computer and another fuse box is located there.
The heater core is mounted to the passenger side firewall on the 1988 Buick Electra 307. The blower motor needs to be removed to access the heater core.
You can bypass your 1988 Buick Skylark heater core by removing the heater core water supply hoses. There will be to water hoses. Connect the water hoses to each other.
Yes you can. The only difference between the Custom and the Limited is the trim level (Seat fabric, wood grain, etc.) Everything else is interchangeable.
1988 Buick LeSabre fuse panel (25 slots) is located on left side of dash with 2 spring loaded thumb screws around corner of dash next to upper door. Push in and turn left. This releases the dash panel to left of steering column for access to fuses. A second Fuse and Relay panel is under dash behind glove box on far right passenger side. Mel
It should be in the black box in the trunk on the passenger side where the jack and lug wrench are
in the gas tank
1988 Buick LeSabre fuse panel (25 slots) is located on left side of dash with 2 spring loaded thumb screws around corner of dash next to upper door. Push in and turn left. This releases the dash panel to left of steering column for access to fuses. A second Fuse and Relay panel is under dash behind glove box on far right passenger side. Mel
the torque for a 1988 lesabre custom is 110 ft. lbs.